59
English
■ [Location]
Assign the positions of portrait screens.
1 to 3
Portrait screen display example
•
When [Portrait display] is set to [Off], the enlarged
position can be confirmed on the screen if [No. of
displays] is set to [3].
Note
●
The settings are memorised separately for each input
terminal.
●
It is possible to set [Display format], [Bezel
adjustment] and [Location] when [No. of displays] is
[3].
●
This menu will be greyed out and cannot be set under
the following conditions.
•
When [Multi screen display] is [On] (see page 55)
•
When [USB media player settings] - [Schedule play
function] is [Enable] (see page 81)
●
When [Portrait display] is [On], the aspect mode
cannot be changed. (see page 40)
●
For 98 and 86 inch models, this setting is displayed
only when the main software version is 3.0000 or
later.
Signal
Examples of [Signal] submenu screen
When HDMI is selected
60.00 Hz
74.18 MHz
1080/60i
33.72 kHz
Signal
Cinema reality
YUV/RGB-in select
Noise reduction
Signal range
MPEG noise reduction
Dynamic backlight control
V-freq.
H-freq.
Dot clock freq.
Signal format
Off
YUV
Auto
Full(0-255)
Off
Off
HDCP status None
Frame creation Off
Colour gamut Auto
Dynamic range
Auto
EDID select 4K/60p/HDR
When DisplayPort is selected
60.00 Hz
74.18 MHz
1080/60i
33.72 kHz
Signal
Cinema reality
Noise reduction
Signal range
MPEG noise reduction
Dynamic backlight control
Dot clock freq.
V-freq.
Signal format
HDCP status
Off
Auto
Full(0-255)
Off
Off
Frame creation Off
H-freq.
None
YUV/RGB-in select YUV
When DVI-D / DIGITAL LINK / SLOT is selected
60.00 Hz
74.18 MHz
1080/60i
33.72 kHz
Signal
Cinema reality
YUV/RGB-in select
Noise reduction
Signal range
MPEG noise reduction
Frame creation
V-freq.
H-freq.
Dot clock freq.
Signal format
Off
YUV
Auto
Full(0-255)
Off
Off
Dynamic backlight control
Off
HDCP status None
To Next Page
Loading...
Need help?
General