Pantum M6500NW Plus Series User Manual

116
14.4.2. Image Defects
Trouble
Cause
Solution
The printout is
whitish or light
• The print media does not meet the
usage specifications, for
example the media is damp or too
rough.
• The resolution in the print program is
set too low, concentration setting is too
low, or toner saving mode is ticked.
• Toner cartridge is damaged.
• The laser toner cartridge is damaged.
• Please use proper print media within
the specification range.
• Set the resolution and concentration
setting of program, or cancel ticking the
save toner mode.
• Replacement of an original one is
suggested.
Toner spots
• The laser toner cartridge is dirty or
leaks toner.
• The laser toner cartridge is damaged.
• The print media that does not meet
usage specification is used. For
example, the media is damp or too
rough.
• The feed channel is dirty.
• If toner spots appear when copying
and scanning, the platen glass may be
dirty.
• The scanner is dirty or damaged.
• Replacement of an original one is
suggested.
• Please use the print media within the
specification range.
• Clean the feed channel.
• Clean the platen glass.
White spots
• The print media that does not meet
usage specification is used. For
example, the media is damp or too
rough.
• The paper path is dirty.
• The internal part of the laser toner
cartridge is damaged.
• The reflective glass of the laser inside
the printer is dirty.
• Please use the print media within the
specification range.
• Clean the feed channel.
• Replacement of an original one is
suggested.
• Please clean the LSU lens.

Pantum M6500NW Plus Series Specifications

General

Brand	Pantum
Model	M6500NW Plus Series
Category	All in One Printer
Language	English