Pantum M6500NW Plus Series User Manual

58
8. Copying
8.1. Copying function
Copying function
Instructions
Common copying
Multipage
Print a multi-page document to a piece of paper.
Clone
Print several identical images to a piece of paper.
Poster
Print a one-page original to pieces of paper.
Collated copy
Collate copies of an original.
Manual dual-side
It supports manual duplex copying for originals.
Image quality
Set the definition mode to improve the copying effect.
Intensity
Adjust deep-light copying effect by setting intensity.
Resizing
Reduce or enlarge the size of image copied.
Paper setting
Set the paper size and paper type.
ID copy
Arrangement mode
Set the ID copy layout.
Paper Size
Set the paper size.
Multipage
Print a multi-page document to a piece of paper.
Receipt copying
Paper Size
Set the paper size.
Multipage
Print a multi-page document to a piece of paper.
8.2. Copying method
1. Press “copying key"/"ID copying key”/"receipt copying key” on control panel.
2. Put an original into the ADF with its front upward (only for plain copying) or on the glass platen
with its front downward. (For how to put an original, please see Section 2.5)
3. Set copying quantity with “direction or number key” according to types (99pieces at maximum).
4. Press “Startup key” for copying.
5. If the original is put on the glass platen, the printer will give a prompt of "Scan the Next Page"
after scanning one page. If the next page exists, please remove the original scanned and put the
next page on the glass platen; then, press "Start". After all pages have been scanned, please press
"OK".
8.3. Copying cancel
Press “cancel key” on control panel if canceling copying.

Pantum M6500NW Plus Series Specifications

General

Brand	Pantum
Model	M6500NW Plus Series
Category	All in One Printer
Language	English