Pantum P3000 Series Maintenance Manual

2-19
2.4.2 Setting Network Products
2.4.2.1 Viewing or Changing Network Settings
You can use the printer embedded Web server to view or change its IP settings.
1. Print DEMO Information Page, for viewing the printer's IP address information.
While the printer is in idle state, press the control panel button (as shown below) for 3 seconds
to print the DEMO page.
2. Type the printer IP address into the Web browser’s address line to open the embedded Web
server.
3. Click the settings tab to obtain network information. Change the settings as needed.
2.4.2.2 Setting or Changing the Login Password of a Web Page
Use the embedded Web server to set a network password or change the existing password.
1. To open the embedded Web server, please log in first.
2. Click the Admin Settings tab.
3. Type the new password in the Password box and Confirm Password box.
4. At the bottom of the window, click on the Apply button to save the settings.

Pantum P3000 Series Specifications

General

Brand	Pantum
Model	P3000 Series
Category	Printer
Language	English