Pentair intellichem User Manual

INTELLICHEM
®
Controller Installation and User’s Guide
12
pH Dosage (page 1/2)
Mixing Time: Select the amount of time in hours and minutes that the IntelliChem
®
Controller will wait in between pH feeding. It should be set to allow sufficient mixing time
for the chemicals to become distributed throughout the pool. The pH Mixing Time is set by
Auto Setup.
Dose (by Volume/Time): Choose the feed method: “by Volume” and “by Time” are
available choices for liquid dosers, as determined by the hardware setup. If CO2 is
selected, then the available choices are “by Time” and “To Setpoint”. If pool volume is less
than 4k gallons, these units automatically get set to milliliters (ml) for better resolution.
pH Dosage (page 2/2)
Dose (Volume): Displays the current dose size (0-9999) in ounces [oz] or milliliters [ml].
Set the amount of ounces (or milliliters) that the IntelliChem controller will feed pH (acid)
each time the IntelliChem controller calls for pH chemicals. The Dose (Volume) is set by
Auto Setup wizard based on pool volume and filter run time.
Dose (Time/Setpoint): Displays the current pH dose (feed) time. If pool volume is less
than 4k gallons, these units automatically get set to milliliters (ml) for better resolution.
Sets the amount of time in hours, minutes and seconds that the IntelliChem controller will
feed pH (acid) each time the IntelliChem controller calls for pH chemicals. The pH dose
time is set by Auto Setup. The Dose (Time) is set by Auto Setup wizard based on pool
volume and filter run time. Dose (to Setpoint) does not have a dose amount, only a time
limit.
Limit (Time/Volume): Displays the current feed limit. Sets the maximum amount of
time/volume in hours, minutes and seconds or volumetric units that will be allowed to
feed pH chemicals. As a safety feature, the IntelliChem controller will only allow a certain
amount of pH chemicals to feed into the system in a 24 hour period. Set the maximum
amount of time in hours (0-24) that will be allowed to feed. The IntelliChem controller
tracks each dose time, and adds them together. When the maximum dose time is reached
or exceeded, the ORP feed system is prevented from feeding until the next 24 hour period
begins, or when the feed timers are cleared manually. The default pH Limit is based on a
safe limit of 2 ppm of the size of the pool, up to a 5 oz maximum. The Limit (Time/Volume)
is set by Auto Setup wizard based on pool volume and filter run time.
Continue on next page.
pH Menu Description
To access the pH Menu: Press MENU  pH Menu  pH Dosage - The ph Dosage
screen 1/2 displays the current dose method (by Volume, Time or to Setpoint).
pH Dosage (for Internal and External Pumps)

pH Dosage 2/2
Dose 00:33:45
Limit 04:14:00
Clear [Power-On]
pH Dosage 1/2
Dose: by Time
Mixing Time:
H:00 M26
pH Dosage
pH Setpt: 7.2
pH Tweak
pH Supplies




pH Menu
ORP Menu
Saturatn Index
Conguration


pH Dosage 2/2
Dose Limit Units
1200 64100 [mL]
Clear [Manual]
pH Dosage 2/2
Dose to Setpoint
Limit 00:08:00
Clear [24hr ]
by Volume by Time by Setpoint

Pentair intellichem Specifications

General

Brand	Pentair
Model	intellichem
Category	Controller
Language	English