24.6 GPS Forwarding
Using the GPS forwarding feature, some Pepwave routers can automatically send GPS reports
to a specified server. To set up GPS forwarding, navigate to Advanced>GPS Forwarding .
Check this box to turn on GPS forwarding.
Enter the name/IP address of the server that will receive GPS data. Also specify
a port number, protocol ( UDP or TCP ), and a report interval of between 1 and
10 seconds. Click to save these settings.
Choose from NMEA or TAIP format for sending GPS reports.
If you’ve chosen to send GPS reports in NMEA format, select one or more
sentence types for sending the data ( GPRMC , GPGGA , GPVTG , GPGSA , and
GPGSV ).
The vehicle ID will be appended in the last field of the NMEA sentence. Note
that the NMEA sentence will become customized and non-standard.
TAIP Sentence
Type/TAIP ID
(optional)
If you’ve chosen to send GPS reports in TAIP format, select one or more
sentence types for sending the data ( PV—Position / Velocity Solution and
CP—Compact Velocity Solution ). You can also optionally include an ID
number in the TAIP ID field.
To Next Page
Loading...
Need help?
General
