3:2
Sewing
Sewing mode - overview (1.0)
1. Selected stitch number and name
2. Stitch fi eld
3. Stabilizer recommendation
4. Presser foot recommendation
5. Feed dog/ IDT™ recommendation
6. Needle recommendation/setting
Set for twin needle
Wing needle recommended
Set for stitch width safety
7. Recommended thread tension
8. Stitch width/stitch positioning
9. Stitch length/density
Note: All symbols and options will not be shown at the
same time.
Select a stitch
By pressing one of the direct selection buttons, you
select that stitch number immediately. Press two
or three digits in quick succession to select a stitch
from 10 and up. If the stitch number does not exist,
you will hear a beep and the fi rst entered digit will
be selected as a stitch.
You can also press the up and down arrow buttons
on the wheel to step between stitches. Press up
or down to open a drop down list. Move up and
down in the list using the up and down arrows on
the wheel. Press OK (B) to select a stitch.
Stitch information
Select the information tab (A) to view more
detailed information, tips and hints for the
currently selected stitch.
Note: If the presser foot recommendation shows a
presser foot with a “+”, an optional presser foot
is required for the selected stitch. Go to the stitch
information tab (A) for details.
B
A
1
2
4
3
567A
8
9
To Next Page
Loading...
Need help?
General
