4:4
Sequencing
Adjust stitches
You can mirror, adjust length, width, density and
stitch position of the selected stitch.
When you have changed a value, the digits will be
highlighted to show that the value is not default.
For 1.5: Move the cursor as described on page 4:1.
Place the cursor after the stitch you want to adjust.
Touch the center of the touch wheel. The stitch
becomes highlighted. Adjust the stitch as described
on pages 3:3-3:4.
Touch the center of the touch wheel again to
activate the cursor.
For 1.0: Use the left and right arrows on the wheel
to highlight the stitch you want to adjust. Adjust
the stitch as described on pages 3:3-3:4.
Note: The adjustments will only affect the highlighted
stitch. If you return to sewing mode, all adjustments
made there will affect the entire sequence and will not be
saved.
Delete stitches or letters in a sequence
To delete a stitch, move the cursor to that stitch
and press delete (9).
To delete the entire sequence from the stitch fi eld,
long press delete. A pop-up message will appear
asking if you wish to delete all stitches. Select yes/
OK. The pop-up message closes and all stitches are
deleted from the stitch fi eld.
ambition™ 1.5
99
Sequencing Alphabet mode
ambition™ 1.0
9
Sequencing Alphabet
mode
9
1.5
To Next Page
Loading...
Need help?
General
