PIAGGIO MSS X10 500ie Executive User Manual

- Unscrew the two screws indicated to remove the
protection, then loosen the indicated nut to remove
the transmission.
- Per il rimontaggio eseguire le operazioni in senso inverso. Dopo aver effettuato la registrazione serrare
il dado indicato alla coppia prescritta.
Locking torques (N*m)
Parking brake adjusting nut 10 Screw fixing parking brake calliper to supporting plate 24 ÷ 27
(*)
(*) with Loctite 243
PARKING BRAKE CONTROL REMOVAL
- Remove the left footrest.
- Disconnect the transmission cable and release
the pipe from the indicated retainer.
BRAKE PAD REPLACEMENT
- Remove the brake calliper.
- Unscrew the two retaining pins and slide off the
pads.
- To refit, carry out the previous operations but in
reverse order.
Locking torques (N*m)
Pin fixing parking brake pads 15 to 20
MSS X10 500ie Executive Braking system
BRAK SYS - 189

PIAGGIO MSS X10 500ie Executive Specifications

General

Brand	PIAGGIO
Model	MSS X10 500ie Executive
Category	Scooter
Language	English