- Remove the helmet compartment paying atten-
tion to the saddle linkage.
- Unscrew the clamp if necessary.
Locking torques (N*m)
Helmet compartment fixing screws 4.5 to 7
See also
Seat
Side fairings
Rear central cover
Radiator fan
First remove the front headlight assembly, the left
and right side fairings, the lower cover, the right
footrest.
First drain off the system.
DRAINING THE COOLING SYSTEM
- Loosen the clamp and after taking out the deliv-
ery tube to the water pump, drain the fluid into a
container of suitable capacity previously placed
under the vehicle.
- To complete the draining of the liquid, also open
the cap of the expansion tank, located in the right
dashboard door.
Recommended products
AGIP PERMANENT SPEZIAL Ethylene glycol-
based antifreeze fluid with organic inhibition
additives. Red, ready to use.
Chassis MSS X10 500ie Executive
CHAS - 216
To Next Page
Loading...
Need help?
General