Turn signals system check
KEY
1. Battery
2. Fuse No. 9
3. ignition switch contacts
4. Fuse No. 5
5. Turn indicators control device
6. Turn indicator control
7. LH indicators
8. RH indicators
9. Turn indicator warning light bulb
10. Emergency light bulb button
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
1) Check the working order of bulbs.
2) Check fuses No. 9 and 5 and the ignition key contacts.
3) Check for voltage between the Pink-Blue cable of the turn indicators control device and ground.
4) If there is no voltage, check that the cable harness is not interrupted.
5) Check the turn indicator control.
6) Check that the Blue-Black and Pink-Black cables between the control and turn indicator device is
not interrupted.
Electrical system MSS X10 500ie Executive
ELE SYS - 76