PICO PicoScope 3000 A Series Programmer's Guide

Prog ramming the 3000A Series oscilloscopes42
Copyright © 2011-2013 Pico Technology Limited. All rights reserved.ps3000abpg.en r9
2.12.19
ps3000aGetUnitInfo
PICO_STATUS ps3000aGetUnitInfo
(
short handle,
char * string,
short stringLength,
short * requiredSize,
PICO_INFO info
)
This function retrieves information about the specified oscilloscope. If the device fails
to open or no device is opened, only the driver version is available.
Applicability
All modes
Arguments
handle, the handle of the device to query. If an invalid handle is
passed, only the driver versions can be read.
* string, on exit, the information string selected specified by the
info argument. If string is NULL, only requiredSize is
returned.
stringLength, on entry, the maximum number of chars that may
be written to string.
* requiredSize, on exit, the required length of the string
array.
info, a number specifying what information is required. The
possible values are listed in the table below.
Returns
PICO_OK
PICO_INVALID_HANDLE
PICO_NULL_PARAMETER
PICO_INVALID_INFO
PICO_INFO_UNAVAILABLE
PICO_DRIVER_FUNCTION

PICO PicoScope 3000 A Series Specifications

General

Brand	PICO
Model	PicoScope 3000 A Series
Category	Test Equipment
Language	English