- 31 -
1 Touch [Cancel].
1 Touch .
2 Touch then .
The system setting screen appears.
3 Touch [AV Source Settings].
4 Touch [Radio settings].
The menu items vary according to the source.
To cancel the storage process
Radio settings
Menu Item Description
[Local]
[Off]
FM: [Level1] [Level2] [Level3] [Level4]
AM: [Level1] [Level2]
Local seek tuning allows you to only tune into
radio stations with sufficiently strong signals.
• The FM [Level4] (AM [Level2]) setting allows
reception of only stations with the strongest signals.
• This setting is available only when [Radio] is
selected as the source.
[FM Step]*1
[100kHz] [50kHz]
[AM Step]*1
[9kHz] [10kHz]
You can switch the seek tuning step for the FM
band, and the seek/manual tuning step for the
AM band.
For the FM band, the manual tuning step is fixed to 50
kHz.
[Regional]*2
[On] [Off]
Switches whether the area code is checked
during the Auto PI search.
[Alternative FREQ]*2
[On] [Off]
Allow the unit to retune to a different frequency
providing the same station.
[Auto PI]*1
[On] [Off]
Searches for the same PI (Programme
Identification) code broadcast station from all
frequency bands automatically when the
broadcasting station contains RDS data.
Even if you set to [Off], the PI search is automatically
performed when the tuner cannot get a good
reception.
To Next Page
Loading...
Need help?
General
