- 21 -
GB
1 GENERAL INSTRUCTIONS AND
PRECAUTIONS
1.1 TESTING AND WARRANTY
TESTING
The product is shipped ready for use. The specific
enclosures attest that it has passed the visual, electrical
and functional tests.
WARRANTY
Our appliances and the relative parts of our manufacture
are covered by a warranty for 1 year from the invoice date.
Under this warranty, we undertake to supply free
replacements for any parts which we, at our own absolute
discretion, accept as faulty.
The manufacturer is obliged to correct any faults or defects,
provided the cold storage appliance has been properly used
in accordance with the instructions given in the manual.
During the warranty period, all labour and travelling expenses
and all freight charges for parts or appliances to be replaced
will be met by the purchaser. Materials replaced under
guarantee are our property and must be returned to us by
the purchaser at his expense.
1.2 FOREWORD
This manual is intended to supply all information required
for the correct installation, use and servicing of the appliance
by skilled personnel.
Before carrying out any operation, read the instructions
herein carefully; they provide essential information
concerning the safety of the appliance.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR IMPROPER USE OF THE PRODUCT.
ALL COPYING OF EVEN PART OF THIS MANUAL IS
STRICTLY FORBIDDEN.
1.3 GENERAL SAFETY RULES
The manufacture declines all responsibility for any operations
carried out on the appliance without following the instructions
in this manual.
Before connecting to the mains electricity supply
check that the voltage and frequency are as
indicated on the appliance nameplate.
Always connect the appliance to a specifically
provided high sensitivity (30 mA) differential
security breaker.
Before any cleaning or servicing, always
disconnect the appliance from the mains power
supply:
1) Turn the master switch to OFF;
2) Remove the plug.
Always wear gloves for servicing work on the
condenser unit, since it may be at
HIGHTEMPERATURE.
CONTENTS
Page
CHAP.1 GENERAL INSTRUCTIONS AND PRECAUTIONS . 21
1.1 Testing and warranty
1.2 Foreword
1.3 General safety rules
1.4 Items to be provided by the customer
1.5 Before contacting the after-sales service
1.6 Ordering spare parts
CHAP.2 TECHNICAL DATA ................................................... 21
2.1 Noise level
2.2 Materials and fluids used
CHAP.3 OPERATION ............................................................. 23
3.1 Applications, proper and improper use,
permitted uses
3.2 Any hazardous areas, risks, hazards and
avoidable risks
3.3 Safety devices adopted
3.4 Limit conditions for operation
CHAP.4 INSTRUCTION FOR THE USERS ............................. 25
4.1 Control Panel
4.2 Description of control panel
4.3 Description of Display and symbols
4.3.1 Description of Display
4.3.2 Description of Symbols
4.4 Description of buttons
4.5 System operating cycles
4.5.1 Switching ON/OFF
4.5.2 Blast chiller +3°C/-18°C Soft or Hard
Cycles with standard probe
4.5.3 Manual Blast chilling
4.6 Defrosting
4.7 Set-Point
4.8 Time
4.9 Parameters
4.10 Alarms
4.11 Printer
CHAP.5 ROUTINE / SHEDULED MAINTENANCE ................. 35
5.1 Elementary safety reles
5.1.1 Ban on removal of guards and safety
device
5.1.2 Emergency procedures in case of fire
5.2 Cleaning the appliance
5.3 Regular checks
5.4 Precautions in case of long lay-off
CHAP.6 WASTE DISPOSAL AND DEMOLITION .................. 36
6.1 Storing waste
6.2 Basic procedures for dismantling the appliance
CHAP.7 INSTALLATION ......................................................... 36
7.1 Transporting and handling the product
7.2 Description of installation procedures
7.3 Connection
7.4 Reinstallation
TECHNICAL DOCUMENTATION
- Technical data ........................................................ 55
- Electric system diagrams .................................... 60
- Conformity declaration ( enclosed )
To Next Page
Loading...
Need help?
General
