50
FEATURES
Instrumentation
MFD Digital Display Programs
History Program
Service Interval Reminder
The gauge logs the number of engine
hours accumulated between service
reminders. When the logged hours
reaches the designated service interval
(set by the user), the gauge provides a
reminder that service is due. "SErVCE"
will flash in the odometer area and
"ENG" will flash in the icon area for five
seconds each time the engine is started
(until the service reminder is reset.) Use
the following procedures to reset the
reminder.
To reset the reminder at the existing interval:
1. Enter the History Program.
2. Press and release the SET button until the service interval screen is
active.
3. Press and hold the SET button for ten seconds, continuing to hold
even after the display begins to flash.
4. When the display stops flashing, release the button. The service
interval has been reset.
To Next Page
Loading...
Need help?
General
