3.36
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
© Copyright Polaris Industries Inc.
ENGINE INSTALLATION
Use the following procedure to reinstall the engine
assembly.
1. Install the engine to transmission coupler (1) onto
the engine. Torque new bolts (2) in sequence (see
image below) to specification.
TORQUE
Engine to Transmission Coupler Engine Mounting
Bolts:
44 ft-lbs (59 Nm) (In sequence)
2. Clean the take-up nut (4) threads and install into the
engine to transmission coupler (1) by hand.
3. Attach suitable lifting straps to the engine and use an
overhead or portable engine hoist to lower the
engine into the vehicle frame. Place spacer blocks
under transmission and engine to assist with
alignment of the engine to transmission adapter
fasteners.
NOTE
Have an assistant help guide the engine in and out of
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.
4. Install the front engine mount bolts and torque to
specification.
TORQUE
Front Engine Mount Bolts:
30 ft-lbs (41 Nm)
5. Insert NEW engine to transmission coupler bolts (3)
half way into the engine to transmission coupler.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
