XU
/ D
BRAKE PADS /
PARKING BRAKE
PADS (INT’L)
INSPECT PAD WEAR
XU
Wiring
Inspect for wear, routing, security; inspect
connectors subjected to water, mud, etc.
XU
/ D
Clutches (Drive and
Driven)
Inspect; clean; replace worn parts
D
Wheel Bearings Inspect; replace as needed
XU
/ D
Shocks
Change shock oil and inspect seals
D Brake Fluid
Change every two years (DOT 4)
Spark Arrestor
Clean daily if driven in mud / water; replace a
damaged arrestor before operating
Cam Chain Tensioner
Inspect; replace as needed
D Valve Clearance
Inspect; adjust as needed
D
Spark Plug
Replacement
Replace; torque to specification
XU Coolant
Replace coolant
D
Toe Adjustment
Inspect periodically; adjust when parts are
replaced
Cam Chain Tensioner
Inspect/clean; replace as needed
XU - Perform these procedures more often for vehicles subjected to severe use.
D - Have an authorized Polaris dealer or other qualified person perform these
services.
When the vehicle goes beyond 500 hours / 5000 miles, return to the 25 hours /
250 mile chart and start the interval process over.
138
MAINTENANCE
To Next Page
Loading...
Need help?
General
