BRAKE INSPECTION
WARNING
Do not apply WD-40 or any petroleum product to brake discs. These types of
products are flammable and may also reduce the friction between the brake
pad and caliper.
1. Check the brake system for fluid
leaks.
2. Check the brake pedal for excessive
travel or a spongy feel.
3. Check the friction pads for wear,
damage and looseness.
4. Check brake discs for signs of
cracks, excessive corrosion,
warping or other damage. Clean any
grease using an approved brake
cleaner or alcohol.
5. Inspect the brake disc spline and
pad wear surface for excessive
wear. Change pads when worn to
0.030” (0.762 mm)
q
.
167
MAINTENANCE
To Next Page
Loading...
Need help?
General
