PRESSURE TANK COOLANT LEVEL
Always check and change the coolant at the intervals outlined in the Periodic
Maintenance Chart beginning on page 114. Maintain the coolant level within one
inch (2.5 cm) of the cold full mark on the side of the pressure tank (when the fluid
is cool).
1. Position the vehicle on a level surface.
2. Remove the hood. See page 38.
3. View the coolant level through the side of the pressure tank.
CAUTION
Escaping steam can cause burns. Never remove the pressure cap while the
engine is warm or hot. Always allow the engine to cool before removing the
pressure cap.
4. Remove the pressure cap and use a funnel to add coolant as needed.
Maintain the coolant level within one inch (2.5 cm) of the cold full mark on the
side of the pressure tank (when the fluid is cool).
5. Reinstall the pressure cap.
TIP
If coolant must be added often, or if the pressure tank runs completely dry,
there may be a leak in the system. Your POLARIS dealer can inspect the
cooling system.
157
MAINTENANCE
To Next Page
Loading...
Need help?
General
