SWITCHES
IGNITION SWITCH
NOTE
Turbo S feature set shown.
The ignition switch
q
is a four-position, key-operated switch. Use the ignition
switch to start the engine. See page 84 for starting procedures.
POSITION FUNCTION
OFF
The engine is off. Electrical circuits are off, except
accessory 12V.
ACCESSORY
The engine is off. Powers the display and terminal
block. Check engine and power steering warning
indicators will appear on the display in this mode but
will turn off when the vehicle is started if no issues are
present.
ON
Electrical circuits are on. Electrical equipment can be
used.
START
Turn the key to the START position to engage the
electric starter. The key returns to the ON position
when released.
The key can be removed from the switch when it is in the OFF position.
32
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
