EN-12
GETTING STARTED
Preparation
1. Attach the camera’s hand strap.
2. Open the camera’s battery/SD memory card door.
3. Insert the battery in the correct orientation as shown.
4. Insert an SD/SDHC memory card (Optional).
The camera has
32MB internal memory (28MB
available for image storage)
, but you can load an
SD/SDHC memory card (We recommend the use of
a Polaroid SD card - purchased separately - up to
4GB) to expand the camera’s memory capacity.
Be sure to format the memory card with this
camera before its initial usage.
5. Close the battery/memory card cover and make sure it
is locked securely.
To prevent valuable data from being accidentally erased from
an
SD/SDHC memory card
, you can slide the write protect tab
(on the side of the
SD/SDHC
memory card) to “LOCK”.
To save, edit, or erase data on an SD/SDHC memory card,
you must unlock the card/
To prevent damaging of an SD/SDHC memory card, be sure
to turn off the power when inserting or removing the SD/
SDHC memory card. If inserting or removing the SD/SDHC
memory card with the power on, the camera will automatically turn off.
To Next Page
Loading...
Need help?
General
