EN-16
CAPTURE MODE
Capturing Images
Your camera is equipped with a 3.0" full color TFT LCD display to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the button to turn the power on.
The status LED turns green when the camera is on.
If the power is turned on in [ ] or [ ] mode, the lens will extend forward and
you are ready for capturing still images or videos. In either mode, if the camera
mode is changed to [ ], the lens barrel will retract into the camera body after 30
seconds.
2. Toggle the button to [ ].
3. Compose your image in the LCD display.
Slide the zoom lever to side to zoom in on the subject, and enlarges the
subject on the LCD display.
Slide the zoom lever to side to zoom out on the subject, and provides a
wider angle image.
4. Press the shutter button.
Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure, and pressing the shutter button
down fully captures the images.
When the focus area frame turns green
the subject is in focus and the proper
exposure is calculated.
When the focus or exposure is not
acceptable, the focus frame area turns
red. Release the shutter button and press
it halfway again to re-focus on the subject.
a
b
To Next Page
Loading...
Need help?
General
