EN-25
Protecting Images
To prevent images from accidentally being erased, follow the steps below:
1. Press the
[] button.
2. Select the image that you want to protect with the
e
/
f
buttons.
3. Press the button.
4. Select [Protect] with the c / d buttons, and press the
button.
5. Select [Single] or [All] with the c / d buttons, and press
the
button.
6. Select [Set] with the c / d buttons, and press the
button.
Protection is applied to the image and the camera
returns to the playback mode.
The protect icon
[]
is displayed with protected images.
When [All] has been selected, [] is displayed
on all the images.
Canceling the Protection
To cancel protection for only one image, display the image
on the LCD display you want to remove the protection.
1. Select [Protect] with the c / d buttons from the playback
menu, and press the
button.
2. Select [Single] or [All] with the c / d buttons, and press
the
button.
3. Select [Cancel Protect] with the c / d buttons, and press
the
button.
The removal of image protection is executed and the
camera returns to the playback mode.
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
0
To Next Page
Loading...
Need help?
General
