EN-26
Erasing Images
1. Press the [ ] button.
2. Select the image you want to erase with the
e
/
f
buttons.
3. Press the button.
4. Select [Single] or [All] with the c / d buttons,
and press the button.
[Single]: Erases the selected image or the
last image.
[All]: Erases all of the images except for the
protected images.
5. Select [Execute] with the c / d buttons, and
press the button.
To not erase, select [Cancel], and press the
button.
Deleting an image will not affect sequential image numbering. For example, if you delete image
number 240, the next captured image will be numbered 241 even though 240 no longer exists. In
other words, an image-number is retired when an image is deleted and will not be reused or
reassigned to another subsequently captured image.
To Next Page
Loading...
Need help?
General
