EN-17
Setting the Date and Time
The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an extended
period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Slide the mode switch to [ ] or [ ].
2. Press the MENU button and select [Setup] menu
with the button.
3. Select [Date/Time] with the / buttons and
press the SET button.
The Date/Time setting screen will be displayed.
4. Select the item’s field with the / buttons and
adjust the value for the date and time with the
/ buttons.
The date and time is set in the order year-
month-day-hour-minute.
The time is displayed in 24-hours format.
5. After confirming all settings are correct, press the
SET button.
To Next Page
Loading...
Need help?
General
