EN-21
PHOTOGRAPHY MODE
[ ] Capture Mode
Your camera is equipped with a 2.5" full color LTPS-TFT LCD monitor to help you
compose images, playback recorded images/video clips or adjust menu settings.
1. Press the POWER button to turn the power
on.
J The status LED lights green and the
camera is initiated.
J When the power is turned on, the camera
will start in the mode that was set.
J If the power is turned on at [ ] or [ ]
mode, the lens will extend forward and it
is ready for shooting. If
the mode switch is set to [ ], the lens
barrel will retract into the camera body
after 30 seconds.
J If the power is turned on at [ ] mode,
the lens will remain closed.
2. Slide the mode switch to [ ].
3. Compose your image in the LCD monitor.
J Pressing the button zooms in on the
subject enlarges the subject on the
LCD monitor.
J Pressing the button provides a wider
angle image.
4. Press the shutter button.
J Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure; pressing the shutter
button down fully captures the images.
J The focus area frame turns blue when the
camera is in focus and the exposure is
calculated.
J When the focus or exposure is not suitable,
the frame of the focus area turns yellow.
J If the photographic preview is set to “On”,
the captured image will be displayed while
the image is being recorded onto the SD
memory card.
1
Press down halfway
2
Press down fully
To Next Page
Loading...
Need help?
General
