EN-33
Playing Back Still Images/Video Clips on a TV
You can also play back your images on a TV screen. Before connecting to any video
devices, make sure to select NTSC/PAL to match the broadcast standard of the video
equipment you are going to connect to the camera.
1. Slide the mode switch to [ ].
2. Connect one end of the A/V cable to the PC/
AV terminal of the camera.
3. Connect the other end to the A/V input socket
of the TV set.
4. Turn the TV and camera on.
5. Play back the still images/video clips.
J The method of operation is the same as
playing back still images and video clips
on the camera.
Playing Back Video Clips
You can play back video clips recorded on the LCD monitor. You can also play back
sound if you recording with the audio.
1. Slide the mode switch to [ ].
J The last image appears on the screen.
2. Select the desired video clip with the / buttons.
3. Press the SET button.
J A press of the / buttons during playback allows fast forward play / fast
reverse play.
J To stop video playback, press the button.
This stops playback and returns to the start of the video clip.
J To pause video playback, press the SET button.
This pauses video playback.
To cancel pause, press the SET button again.
J Video clips cannot be displayed rotated or enlarged.
To Next Page
Loading...
Need help?
General
