EN-30
Setting the Panorama Mode
This mode is designed to make it easier to take a series of shots then stitch them
together with software to make a single image. You can capture a photographic
subject that won’t fit into a single frame, such as a landscape, and stitch it together
later with a program such as Cool 360 or Photoshop application.
1. Slide the mode switch to [ ].
2. Press the MENU button.
3. Select [Scene Mode] with the / buttons, and press the SET button.
4. Select [Panorama] with the / buttons, and press the SET button.
5. Press the MENU button.
6. Select the photographic direction with the / buttons.
7. Shoot the first image.
J The next image appears beside the previous image.
8. Orient the camera so that the second frame overlaps a small portion of the
photographic subject of the first image and press the shutter button to capture
the next image.
9. Follow the same steps to capture subsequent images in the sequence.
10. Finish the sequence by pressing the MENU button or switch to another mode
after the last image has been recorded.
To Next Page
Loading...
Need help?
General
