ASSIGN/DETACH INSTRUMENT TO/FROM THE USER
Assign Instrument
Assignment requirements:
User is allowed to use the instrument;
No instrument is currently assigned to the user;
User didn't excess user or group DE threshold;
Instrument is connected to PC.
To assign the instrument:
• Highlight required user in the system components field (a card of the selected user
opens in the right area);
• Press initialization button of connection with the instrument –
.
System MAIN ADMINISTRATOR or OPERATOR (if allowed by MAIN
ADMINISTRATOR) can assign/detach instrument to/from the user.
Software enables assignment of one instrument to one user at a time
(creation of user-instrument linked pair).
If software detects any exceeded DE threshold, Exceeded Thresholds
alarm window will be displayed immediately.
That means that this user had been exposed to the higher than preset
thresholds levels
of radiation and has potential health risks while
working within the ionizing radiation zone.
If Proceed Anyway button is clicked software will ignore exceeded
threshold warning and will continue the assignment.
____________________________________________________________________________________
© 2016 Software Guide www.polimaster.com
103
To Next Page
Loading...
Need help?
General
