Allow Instrument Settings – flag this check box to allow reading of set (or write
changed) operation settings of the connected instrument.
Allow Program Setting – flag this check box to allow group members to configure
software settings.
Press OK button to confirm and save information on new group.
GROUP RIGHT TO WORK WITH THE INSTRUMENTS
Highlight required users group that will be allowed/denied to work with the instruments. In
the right field of the main program window (in the field of operation information display) a
card of the selected users group will be displayed.
Select Using Instruments dialogue window (see below).
Using Instruments
menu command and dialog window will be visible only
for ADMINISTRATORS to all
ow/deny (enable/disable) users to work with
instruments. Window header contains name of the involved group (within
brackets).
All users of newly added group are allowed to work with the
instruments by default.
Group users can be allowed/denied by MAIN ADMINSTATOR to
work with the instruments when the group was added completely.
Open group card. Select Group
menu and click Using Instruments
command.
____________________________________________________________________________________
© 2016 Software Guide www.polimaster.com
77
To Next Page
Loading...
Need help?
General
