Wi-Fi and Bluetooth Connections
Connect to a wireless network and use Bluetooth devices with your phone.
The following models support Bluetooth:
• Poly Edge E220
• Poly Edge E320
The following models support Bluetooth and Wi-Fi:
• Poly Edge E350
• Poly Edge E450
• Poly Edge E550
Connecting to a Wireless Network
You can connect your Wi-Fi capable phone to a wireless network.
Enable Wi-Fi
You must enable Wi-Fi before connecting to a Wi-Fi network.
Task
1 Do one of the following:
• Go to Menu > Wi-Fi.
• Go to Menu > Settings > > Basic > > Wi-Fi Menu.
Note:
Your system administrator determines the availability of these options.
2 Press the Select key to enable Wi-Fi, and then press Save.
3 Press Reboot.
After the phone reboots, it can connect to a wireless network.
Connect to a Wireless Network
After you enable Wi-Fi on your phone, connect to a wireless network.
Task
1 Do one of the following:
• Press the Scan softkey to scan for available networks and select one to enter information as required by the
n
etwork’s security settings.
Note:
For a WPA2-Enterprise network, select the correct authentication mode.
• Press the Other softkey to manually enter network settings, including SSID, security type, and password.
2 Select Connect.
Update Wireless Network Settings
You can update settings for a saved wireless network.
Task
» Do one of the following:
• To change settings related to the current network, to re-attempt connection, or to forget/disconnect the network,
s
elect Saved Network.
• To edit advanced network settings including IP settings, SSID, security options, and radio regulatory country
domain, select Advanced.
78
To Next Page
Need help?
General
