• Wireless Settings
• Softphone Settings
• Audio Tuning Settings
• Advanced Settings
• Restore Defaults settings
Note:
The features list in PLT Hub varies based on thePoly headset that you use.
Set the Answering Call Alert
You can configure the headset to alert you on incoming calls to the phone.
Task
1 Do one of the following:
• Go to Settings > Basic > PLT Hub > General.
• Go to PLT Hub > General.
2 Select Answering Call Alert.
3 Select On to enable the call alert and Off to disable the call alert.
Set the Mute On or Off Alert
You can set the headset to notify you when the headset’s microphone is muted. You can choose to hear a voice alert, a
s
ingle tone, or a double tone.
Task
1 Do one of the following:
• Go to Settings > Basic > PLT Hub > General.
• Go to PLT Hub > General.
2 Select Mute On/Off Alert.
3 Select one of the following alerts:
• Voice
• Single Tone
• Double Tone
Set the Mute Reminder
You can set the headset to notify if the headset's microphone is muted in an active call.
Task
1 Do one of the following:
• Go to Settings > Basic > PLT Hub > General.
• Go to PLT Hub > General.
2 Select Mute Reminder.
3 Select one of the following reminders:
• Off
• Audible Reminder
• On-Screen Reminder
• On-Screen & Audible Reminders
Set the Mute Reminder Interval
You can set the headset to notify at set intervals when you are on mute.
You must set Mute Reminder to Audible Reminder to use the mute reminder interval option.
Task
84
To Next Page
Loading...
Need help?
General
