GETTING STARTED GUIDE FOR THE VSX SERIES
WWW.POLYCOM.COM/VIDEODOCUMENTATION
6
Calling from the Contacts or Speed Dial List
Your system administrator may have customized a Contacts or Speed Dial list
for easy calling.
To place a call using the Speed Dial or Contacts list:
1. Select Speed Dial or Contacts from the Place a Call screen.
2. Scroll to the entry you want to call.
3. Press
Call-Hang Up to place the call.
Calling by Using the Directory
The directory is a list of names and numbers that’s stored locally on the VSX
system.
If the system is registered with a global directory, the directory also includes
entries from the global directory. Global entries are marked with
. For both
types of entries, the name appears with its corresponding number, IP address,
or both.
To place a call from the directory:
1. Press Directory on the remote control.
2. Find the entry to call.
3. Press Call-Hang Up to place the call.
For more information about using the directory, see Working with Directory Entries on
page 21.
Depending on your system configuration, when you make a call using an entry with both
ISDN and IP dialing information, the system may prompt you to choose which way to
place the call.
Ending a Video Call
To hang up from a call:
1. Press
Call-Hang Up on the remote control.
2. Confirm that you want to end the call.
If you don’t confirm that you want to hang up, the system disconnects the call
automatically after 60 seconds.
To Next Page
Loading...
Need help?
General
