INCLUDING MULTIPLE SITES IN CALLS
© Polycom, Inc.
25
Create a multi-site entry in the directory.
To place a multipoint call by adding sites to a call:
1. Call the first site.
2. When the call connects, press
Call-Hang Up.
3. Select Add Video Call, and place a call to the next site.
4. Repeat steps 2 and 3 until all sites are connected.
To place a multipoint call using a multi-site directory entry:
1. Press
Directory on the remote control.
2. Find the multi-site entry in the directory list.
3. Press
Call-Hang Up to place the call.
To place a cascaded multipoint call:
1. Place a multi-site call from the Directory, or place calls one at a time to
up to three other sites.
2. Ask each site to call up to two additional sites.
Supplying a Password for External MCU Calls
External MCUs sometimes require you to enter a password in order to join a
conference. Depending on your system configuration, you can set up the
system to enter the meeting password for you.
To configure a meeting password:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Enter the password in the Meeting Password field, either by:
Pressing the remote control number buttons, using the text-entry
method commonly used with cell phones, or
Pressing
Keyboard to use the on-screen keyboard to enter
characters
4. Press
Home to save your change and return to the Place a Call
screen.
To Next Page
Loading...
Need help?
General
