Prolitec GENIE User Manual

Genie 16Chapter 5 OPERATING INSTRUCTIONS
• Press L to set the intensity and the day of the week will blink.
• Adjust the day of the week forward or backward using E or F.
HINT: In addition to individual days, you can also set
“all days,” “week days,” or “weekend days.”
• Press L to set the day of the week. Start will display on the far right side and the hour will
blink.
• Adjust the start hour forward or backward using E or F.
• Press L to set the start hour and the minute will blink.
• Adjust the start minute forward or backward using E or F.
• Press L to set the start minute. Stop will display on the far right side and the hour will blink.
• Adjust the stop hour forward or backward using E or F.
• Press L to set the stop hour and the minute will blink.
• Adjust the stop minute forward or backward using E or F.
• Press L to set the step minute.
The appliance will automatically switch from Set Program to Run Program after 30 seconds of
inactivity, or you can press I until Set Program is displayed above the time. You may review the
programs by pressing L while the appliance is in Run Program mode.
5

Prolitec GENIE Specifications

Power

input voltage	100 – 240VAC
input current	0.6A max
output voltage	15VDC
output current	1.2 A
battery type	Lithium 3V, #CR2032

Operating Environment

working temperature	0˚ to 40˚ C
working humidity	85% or less

Capacity

liquid capacity	500 mL cartridges
service area	Up to 15, 000 cu. ft. (425 m[3])

Weight and Dimensions

dimensions	11” x 7.5” x 3” (27.9 cm x 19.1 cm x 7.6 cm)
weight	5.2 lbs (2.4 kg)