EasyManuals Logo
Home>Prolitec>Accessories>GENIE

Prolitec GENIE User Manual

Prolitec GENIE
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Genie 19Chapter 5 OPERATING INSTRUCTIONS
4. Press and hold E for one second, and the display will show SAVE for
about ten seconds.
5. The ve buttons will light in sequence from left to right.
6. Remove the SD card; the display will show the currently loaded rmware version and the pump
will run for one second.
7. Press : to turn on the power.
8. Be sure that the power is on and the appliance is in Run Program mode prior to closing and
locking the door.
9. The new le created on the SD card will be called “outsche.txt.” Changing it to “schedule.txt”
allows the programs to be loaded on another appliance.
Setting Scent Intensity
1. Determine the approximate size of the room in cubic feet or cubic meters by multiplying length
x width x ceiling height.
2. Consult the Room-Size Table to give you a level (1 to 50) to set. THIS IS ONLY A STARTING
POINT.
Hint: There are many variables to nding the scent level
that works: size, airow, number of fresh air changes per
hour, number of people in the space and, most of all, user
preferences. Experiment with different levels until you are
satised. Utilize the S3 Tool.
Scent Control
If you followed the Room-Size Chart or S3 Tool, you have set Genie to the low end of the range for
your room size. If after one hour you feel the scent is not detectable, increase the setting by about
10%. For example, if your start setting was 20, increase it by 10%, or to setting 22. Keep increasing
until you and others in the space can detect a slight scent throughout the space.
The Last Step
1. Set the appliance to either 24/7 or Run Program.
2. Make sure the power is on.
3. Close and lock the door, storing the key in a known place.
5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Prolitec GENIE and is the answer not in the manual?

Prolitec GENIE Specifications

Power IconPower
input voltage100 – 240VAC
input current0.6A max
output voltage15VDC
output current1.2 A
battery typeLithium 3V, #CR2032
Operating Environment IconOperating Environment
working temperature0˚ to 40˚ C
working humidity85% or less
Capacity IconCapacity
liquid capacity500 mL cartridges
service areaUp to 15, 000 cu. ft. (425 m[3])
Weight and Dimensions IconWeight and Dimensions
dimensions11” x 7.5” x 3” (27.9 cm x 19.1 cm x 7.6 cm)
weight5.2 lbs (2.4 kg)

Related product manuals