Page | 31
REMOTE CONTROL
______________________________________________________________________
Overview.
Your machine has been fitted with remote control system.
The Evo track machine has been developed to operate with a Scanreco radio control
unit. Please read carefully and understand the operation. Failure to read and fully
understand this information could result in injury or death.
The Evo 1 you have purchased has the following options integrated with Scanreco
system:
• Forward and reverse tracking.
• Weight raise and drop.
• Extending track for counter balance and stability.
• Throttle up and down.
• Park brake operation.
• High speed tracking operation.
The above image is of your transmitter with the controls numbered, Please observe the
the following page for the functions and operation. Please read carefully and understand.
1. Left track control for forward and reverse operation.
2. Right track control for forward and reverse operation.
3. Extending track control.
4. Raise and lower the weight control.
5. Rpm control (keep in manual setting, this machine has no auto rpm).
6. Park Brake control switch.
7. Engine speed rpm control.
8. High speed selector switch.
9. 20% track control adjustment switch.
To Next Page
Loading...
Need help?
General
