Who can carry out the plant / equipment documented inspection?
All plant / equipment must be inspected and signed off by a competent person.
A competent person is:
• A person that has been trained to use the plant / equipment being inspected or
• A person who has a good understanding and knowledge of the plant / equipment being inspected.
• All plant / equipment must have a documented inspection prior to its use.
• A documented inspection only has to be carried out once a week however plant / equipment MUST always be
inspected prior to its use.
• Under no circumstances is plant / equipment to be used if a defect has been identified.
• Under no circumstances is plant or equipment to be used if it is not within the service date displayed on its service
tag.
• Contact your Manager if you have any queries.
How to use the plant / equipment inspection sheet
• Tick Yes or No to confirm that the question in the appropriate section has been answered.
• If the question is not applicable to the equipment being inspected tick N/A.
• Finally sign, print your name and date to confirm the plant has been inspected.
IMPORTANT – Plant and equipment must only be used for a task that it has been designed for.
Plant / equipment details
Plant identification number
Generic Questions for EVO Machine
Are all warning and information signs fitted, legible and understood?
Are all controls working correctly:-
Park switch / hydraulic brake
Throttle control, up / down
Mast forward tilt control
Are all dangerous parts of the plant / equipment adequately guarded?
Are there any visible signs of damage, leaking to hydraulic hoses or hydraulic controls?
Are cables in good order and free from any damage
Are the tracks and rollers free from damage
Are the correct tools available for adjusting the plant / equipment?
Inspection carried out by: