Page | 46
RECOMMANDED LUBRICANTS
Mechanical parts / greasing points: we recommend multipurpose grease - generously
ENGINE SERVICING
Always refer to your specific Yanmar engine documentation for servicing.
First servicing after 50 hours as recommended by Yanmar and every 500 Hours or 1-
year maximum intervals after first servicing.
We use 10W30 engine oil – ACEA E3 minimum (E4, E5 and more are best – see engine
documentation for more details)
Engine coolant: refer to engine technical document
Engine oil: refer to engine technical document
Engine fuel: diesel
Hydraulic system oil: we recommend using :
- 10µm oil filter PROTECH ref. HVSZ0008
- HV46 - High viscosity oil
- Change filter every 500 hours or 1 year maximum
On a warm engine, if your indicator goes in yellow, change filter
rapidly. If red, stop using the machine until new filter in place.
Use a grease gun to feed
grease into the cylinder to
obtain 20-30 mm slack
when pushed with a weight
of 60 Kg
To Next Page
Loading...
Need help?
General
