Page | 38
ELECTRICAL FUNCTIONS
Switches and Controls
From left to right the switches are:- lights, fast, throttle control, engine control, e-stop and
park.
Lights. This switch turns on/off the work lights as required, and is internally illuminated
when operated.
Fast. This will operate the fast solenoid and switch the hydraulic motors to fast speed.
The switch is internally illuminated when fast speed is selected.
Throttle. This is a momentary action switch for engine throttle control. The throttle is
controlled by an electrically operated transducer. Pressing the top side of the switch will
increase engine revs, and pressing the bottom of the switch will decrease engine revs
between min/max limits.
Engine control. This is a 4 position keyswitch:-
0 engine off
I ignition on
II glow plugs energised
III engine start
E-Stop. This switch will stop the machine, engine off, and all electric functions turned off.
Push the switch button downwards to activate the e-stop. The e-stop is released by
pulling the button upwards.
Park. This will operate the park solenoid valve and turn off hydraulic pressure to the
brake control of the hydraulic motor. The park function will stop movement of the
machine but maintain operation of all other hydraulic control functions.
The park function is active when right hand side of the switch is depressed, switch will
be internally illuminated.
To Next Page
Loading...
Need help?
General
