Jun. 2020 / Rev.0.1 DS-UB40.241-EN All values are typical figures specified at 24Vdc input voltage, 40A output current in
power supply mode at 25°C ambient, no charging and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
19. APPROVALS AND FULFILLED OR TESTED STANDARDS
CB Scheme Certificate
IEC 61010-2-201 Electrical Equipment for Measurement, Control and
Laboratory Use - Particular Requirements for control equipment
CB Scheme Certificate
IEC 60950-1 General safety requirements for Information Technology
Equipment (ITE)
UL 61010-2-201
(former UL 508)
planned
UL Certificate
Listed equipment for category NMTR - UL 61010-2-201 Electrical
Equipment for Measurement, Control and Laboratory Use - Particular
requirements for control equipment
Applicable for US and Canada
E-File: E198865
Flowing Mixed Gas Corrosion Test - Test KE, Method 4
H
2
S: 10ppb, NO
2
: 200ppb, Cl
2
: 10ppb, SO
2
: 200ppb
Test Duration: 3 weeks, simulates a service life of 10 years.
Airborne Contaminants Corrosion Test - Severity Level G3
H
2
S: 100ppb, NO
x
: 1250ppb, Cl
2
: 20ppb, SO
2
: 300ppb
Test Duration: 3 weeks, simulates a service life of 10 years.
Paint Wetting Impairment Substances Test (or LABS-Test)
Tested for Zone 2 and test class C1 according to VDMA 24364-C1-L/W
for solvents and water-based paints
20. REGULATORY COMPLIANCE
EU Declaration of Conformity
Trade conformity assessment for Europe
The CE mark indicates conformance with the European
- RoHS directive and the
- EMC directive
Manufacturer's Statement
EU-Regulation regarding the Registration, Evaluation, Authorisation
and Restriction of Chemicals
Manufacturer's Statement
EU-Directive on Waste Electrical and Electronic Equipment
Manufacturer's Statement
Administrative Measures for the Restriction of the Use of
Hazardous Substances in Electrical and Electronic Products
25 years
To Next Page
Loading...
Need help?
General