Jun. 2020 / Rev.0.1 DS-UB40.241-EN All values are typical figures specified at 24Vdc input voltage, 40A output current in
power supply mode at 25°C ambient, no charging and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
22.6. UZK24.262-E1 – 24V, 26AH BATTERY MODULE EXTENSION
The UZK24.262-E1 battery module extension utilizes two non-spillable
maintenance-free VRLA lead-acid batteries with absorbent glass mat
(AGM) technology connected in series. It is assembled with all wiring
included.
The battery module extension can be connected to the UZK24.262,
which doubles the autonomy time by paralleling of batteries.
For easier mounting and because of the high weight the battery holder
is made in two parts.
The battery module is available in two different options. It can be
ordered as UZK-module with batteries included or as UZO-module
without batteries, which can be installed at a later date. This option
helps to avoid outdated batteries.
Please note:
The wire length in the drawing has
only a symbolic character. The real
wire length is typically suitable to
connect the extension module with
the battery module.
To Next Page
Loading...
Need help?
General