14
Bell [1]
No Signal [000]
Battery?
Inputs?
Please Wait
300
Input [01]
Good
Bells?
Bell [1]
Good
Input [01]
Excellent [100]
Diagnostics
Battery Status
The diagnostics function also monitors the battery of
each of input and bell so that any low/bad batteries can
be quickly recognised and replaced.
The Enforcer has an advanced battery test mechanism
that operates by monitoring all inputs/bells after 5
minutes from the start of the test. It will perform this test
every 16 seconds.
Once the function is entered, a count down from 300 will
begin. Press t to go to the main display, one of the
following will be displayed:
Testing Waiting for a battery result
Good At least one month of battery life remaining
Replace Battery needs to be replaced immediately
Diagnostics Continued...
Press
t
Press
t
Press
t
Press
t
Use [ ] Press
t
Press
t
Press
t
Use [ ] Press
t
To Next Page
Loading...
Need help?
General
