Pyronix Enforcer 32WE Setup Guide

17
There is a rear wall tamper protection switch at the
back of the MC1-WE device.
This tamper protection switch prevents the device
from being removed from its installed location and
prevents the lid from being removed.
The MC1-WE has a detection point:
The example below shows how you can use them on an entry door:
Rear Tamper Switch
Detection point
Technical Specifications
MC1-WE
Wireless magnetic contact/universal transmitter
with 1 reed, 1 input & tamper
Back view of the MC1-WE
Tamper Switch
Using Magnetic Contact 1 (S1)
To enable Magnetic Contact 1 you must remove the
jumper link from the S1 enable pins:
Door
Door Frame
Reed Switch
S1
S1 Enable
Learn
S2 Enable
Z T
Test Result
T
C
Z
WINDOW
Contact
Magnet
TAMPER
Tamper
Enable/
Disable
Zone
Enable/
Disable
Magnetic
Contact 1
Enable/
Disable
Learn
Button
Status LEDs
ZONE
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
Example:
Universal Transmitter
T
C
Z
Z T
T
T
N / C
Door
Contact
/ Sensor
+
-
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
CR2 Battery
CR2 Battery
If the battery needs to be replaced, the
correct battery type (CR2) must be
installed
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
MC1-WE
WHITE
3mm ABS, 0.4mm HDPE in Lens Area
868MHz, FM Transceiver Narrow Band
Fully Encrypted Rolling Code
300m Free Space
Three LED Combinations
(RSSI, Battery Status and Alarm)
1 x MC1-WE
2, Side and End
1 External Input & 1 External Tamper Input
3.6V 2.2Ahr AA Lithium Battery
Up to 2 Years
Front+Optional Rear Tamper
-20°C to 50°C
-10°C to 50°C
Model:
Colour:
Casing:
Transmission Frequency:
Transmission Method:
Transmission Range:
Indication:
Reed Switch:
Detection Points:
Detection Inputs:
Battery:
Battery Life:
Tamper Switch:
Storage Temperature:
Operating Temperature:
Back view of the MC1-WE
Tamper Switch
Using Magnetic Contact 1 (S1)
To enable Magnetic Contact 1 you must remove the
jumper link from the S1 enable pins:
Door
Door Frame
Reed Switch
S1
S1 Enable
Learn
S2 Enable
Z T
Test Result
T
C
Z
WINDOW
Contact
Magnet
TAMPER
Tamper
Enable/
Disable
Zone
Enable/
Disable
Magnetic
Contact 1
Enable/
Disable
Learn
Button
Status LEDs
ZONE
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
Example:
Universal Transmitter
T
C
Z
Z T
T
T
N / C
Door
Contact
/ Sensor
+
-
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
CR2 Battery
CR2 Battery
If the battery needs to be replaced, the
correct battery type (CR2) must be
installed
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
MC1-WE
WHITE
3mm ABS, 0.4mm HDPE in Lens Area
868MHz, FM Transceiver Narrow Band
Fully Encrypted Rolling Code
300m Free Space
Three LED Combinations
(RSSI, Battery Status and Alarm)
1 x MC1-WE
2, Side and End
1 External Input & 1 External Tamper Input
3.6V 2.2Ahr AA Lithium Battery
Up to 2 Years
Front+Optional Rear Tamper
-20°C to 50°C
-10°C to 50°C
Model:
Colour:
Casing:
Transmission Frequency:
Transmission Method:
Transmission Range:
Indication:
Reed Switch:
Detection Points:
Detection Inputs:
Battery:
Battery Life:
Tamper Switch:
Storage Temperature:
Operating Temperature:
Back view of the MC1-WE
Tamper Switch
Using Magnetic Contact 1 (S1)
To enable Magnetic Contact 1 you must remove the
jumper link from the S1 enable pins:
Door
Door Frame
Reed Switch
S1
S1 Enable
Learn
S2 Enable
Z T
Test Result
T
C
Z
WINDOW
Contact
Magnet
TAMPER
Tamper
Enable/
Disable
Zone
Enable/
Disable
Magnetic
Contact 1
Enable/
Disable
Learn
Button
Status LEDs
ZONE
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
Example:
Universal Transmitter
T
C
Z
Z T
T
T
N / C
Door
Contact
/ Sensor
+
-
S1
S1 Enable
Learn
Z T
Test Result
T
C
Z
CR2 Battery
CR2 Battery
If the battery needs to be replaced, the
correct battery type (CR2) must be
installed
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
MC1-WE
WHITE
3mm ABS, 0.4mm HDPE in Lens Area
868MHz, FM Transceiver Narrow Band
Fully Encrypted Rolling Code
300m Free Space
Three LED Combinations
(RSSI, Battery Status and Alarm)
1 x MC1-WE
2, Side and End
1 External Input & 1 External Tamper Input
3.6V 2.2Ahr AA Lithium Battery
Up to 2 Years
Front+Optional Rear Tamper
-20°C to 50°C
-10°C to 50°C
Model:
Colour:
Casing:
Transmission Frequency:
Transmission Method:
Transmission Range:
Indication:
Reed Switch:
Detection Points:
Detection Inputs:
Battery:
Battery Life:
Tamper Switch:
Storage Temperature:
Operating Temperature:

Pyronix Enforcer 32WE Specifications

General

Brand	Pyronix
Model	Enforcer 32WE
Category	Security System
Language	English