Pyronix Enforcer 32WE Setup Guide

25
SHOCK-WE
Wireless transmitter with wall tamper and shock sensor
Technical specification
Printed Circuit Board
Adjustable PCB settings
The wireless transmitter with wall tamper and shock sensor is used on the Enforcer Radio Control
Panel along with the current range of detectors, receivers and transmitters.
The function of the shock sensor wireless transmitter is to provide an alarm signal if vibrations picked
up from its mounting surface exceed a predetermined level, which can be easily adjusted.
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
Electrical Specification Sensitivity
Voltage: >2.5V High range sensitivity band
Current: 12uA Low range sensitivity band
Disturbance: Rolling 30s period
Battery
Life: Greater than 2 years Operating Environment
CR2 3.0 Volt -10 to 50°C
+
-
Battery
LEDs
Front Tamper
Rear Tamper
Learn Button
Disabled
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
Low Range Sensitivity Band: High Range Sensitivity Band:
Link Off and Turn
potentiometer right for
more sensitive and left
for less sensitive
Link On and Turn
potentiometer right for
more sensitive left for
less sensitive
CR2 BATTERY
+
-
Background
Disturbance
LED Enable
Pulse
Count 4
Pulse
Count 2
Low/High
Sensitivity
Sensitivity
Band
LEARN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
Electrical Specification Sensitivity
Voltage: >2.5V High range sensitivity band
Current: 12uA Low range sensitivity band
Disturbance: Rolling 30s period
Battery
Life: Greater than 2 years Operating Environment
CR2 3.0 Volt -10 to 50°C
+
-
Battery
LEDs
Front Tamper
Rear Tamper
Learn Button
Disabled
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
Low Range Sensitivity Band: High Range Sensitivity Band:
Link Off and Turn
potentiometer right for
more sensitive and left
for less sensitive
Link On and Turn
potentiometer right for
more sensitive left for
less sensitive
CR2 BATTERY
+
-
Background
Disturbance
LED Enable
Pulse
Count 4
Pulse
Count 2
Low/High
Sensitivity
Sensitivity
Band
LEARN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
Electrical Specification Sensitivity
Voltage: >2.5V High range sensitivity band
Current: 12uA Low range sensitivity band
Disturbance: Rolling 30s period
Battery
Life: Greater than 2 years Operating Environment
CR2 3.0 Volt -10 to 50°C
+
-
Battery
LEDs
Front Tamper
Rear Tamper
Learn Button
Disabled
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
Low Range Sensitivity Band: High Range Sensitivity Band:
Link Off and Turn
potentiometer right for
more sensitive and left
for less sensitive
Link On and Turn
potentiometer right for
more sensitive left for
less sensitive
CR2 BATTERY
+
-
Background
Disturbance
LED Enable
Pulse
Count 4
Pulse
Count 2
Low/High
Sensitivity
Sensitivity
Band
LEARN

Pyronix Enforcer 32WE Specifications

General

Brand	Pyronix
Model	Enforcer 32WE
Category	Security System
Language	English