16 | Getting Started
1.2 Installing the SIM Card
Follow these steps to install a GSM SIM (Subscriber Identity Module)
card provided by your local network service provider. The SIM card
contains your phone number, service details, and phonebook/message
memory.
Your device supports both 1.8V and 3V SIM cards. Some legacy SIM
cards will not function within this device. The customer should consult
with their service provider for a replacement SIM card. There may be a
fees for this service
1. Make sure your device is turned off.
2. Slide the cover latch to remove the battery cover.
3. Pull the plastic ribbon to remove the battery. Then, insert the SIM
card into the SIM card slot with its gold contacts facing down (the
cut-off corner of the SIM card should match the cut-off corner in
the slot).
4. Replace the battery and gently push down to snap it into place.
5. Replace the battery cover.
To Next Page
Loading...
Need help?
General