Quincy Compressor QCS Series User Manual

Section II - QCS100
Putting into Operation
Fill the QCS with clean water:
Take off the cap, remove filter mat from
the pressure relief chamber.
Let water in through the inlet opening
(container and filter chamber are filling
up).
Shut off the water when it starts to
come out at the water outlet.
notiCe
The water level will drop due to the
gradual water intake of the filter.
Add clean water as required, re-install
the filter mat in the pressure relief
chamber and reinstall the cap.
The QCS unit is now ready for operation:
Compressor condensate can now flow into
the QCS via the pressure relief chamber.
♦
♦
♦
♦
notiCe
Open the outlet of the condensate
drain and check all connections for
leaks.
8 Quincy Compressor-QCS High Efficiency Emulsion Separators

Quincy Compressor QCS Series Specifications

General

Brand	Quincy Compressor
Model	QCS Series
Category	Water Filtration Systems
Language	English