2.4. Monitoring the metrological parameters of the instrument
Metrological characteristics of the balance requires periodical inspection
carried out by its operator. Inspection frequency is conditioned by ambient
conditions in which the balance is used, types of performed processes and
accepted quality management system in an organization.
2.5. Data included in this user manual
Please read the user manual carefully before assembling and startup, even if
the user is experienced with this type of weighing instruments.
2.6. Staff training
This balance should only be operated and maintained by personnel who is
trained and experienced in using this type of balances.
3. TRANSPORT AND STORAGE
3.1. Delivery check
Please check the packaging immediately upon delivery and the device during
unpacking for any visible signs of external damage.
3.2. Packaging
Please retain all parts of the original packaging should the balance be
transported in the future. Only the original packaging should be used for
dispatching the balance. Before packing, disconnect all attached cables and
remove any loose/movable parts (weighing pan, anti-draft shields, etc.). Please
place balance and its components in their original packaging, and protect them
against damage during transport.
To Next Page
Loading...
Need help?
General