RADWAG PS Series User Manual

67
14.5. Density determination of solids and liquids
Optional equipment of balances PS series AS is a kit for determining density of
solids and liquids. In order to assemble the density kit on the balance, remove
the weighing pan and anti-draft shield from the balance. In the place of the
weighing pan assemble the weighing pan with stand (1) and place beaker’s
basis (2) on it.
Components of the density kit:
1
Weighing pan with stand
7
Thermometer
2
Bottom weighing pan of density
determining kit for solids
8
Thermometer handle
3
Flexible connector
9
Sinker
4
Top weighing pan of density
determining kit for solids
10
Beaker basis
5
Beaker
11
Additional stand for set of pans or
a sinker
6
Hook
12
Additional set of pans for
determining density of solids,
which density is lower than density
of water.

RADWAG PS Series Specifications

General

Brand	RADWAG
Model	PS Series
Category	Scales
Language	English