RADWAG PS Series User Manual

83
17. UNDER HOOK WEIGHING
In standard analytical and precision balances loads can be weighed under the
weighing pan. Such means of operation requires placing a balance on a uplifted
position. RADWAG offers a rack for under hook weighing. The rack is an optional
equipment offered for balances PS series.
For under hook weighing follow below procedure:
• Remove plastic hole plug in basis of a balance;
• There is suspension place for hook visible in the hole – the suspension is
installed permanently to balance mechanism;
• In the hole install the hook for under hook weighing - the hook is standard
equipment of a balance. Weigh loads using under hook option;
• As under hook weighing is finished, close the hole in balance basis
with plastic hole plug.
CAUTION:
The suspension for hook must not be turned, twisted or manipulated
in any direction. Such actions may cause damage to balance
mechanism.
Mass of all additional elements of under hook weighing kit, like: the hook,
weighing pan, string, etc. should be zeroed by pressing Esc/TARE key.

RADWAG PS Series Specifications

General

Brand	RADWAG
Model	PS Series
Category	Scales
Language	English